Mini Transmission Immersion Probe
The Mini Transmission Dip Probe is a miniature transmission probe for absorption measurements.
The miniaturised tip of only 3.2mm (1/8") diameter enables sampling in most miniaturised centrifuge tubes available on the market.
The Mini Dip Probe has a 10mm optical path length and can be used in the UV/VIS (200-800nm) or VIS/NIR wavelength range (350-2000nm).
The probe has 2 SMA connectors for convenient coupling to the Avantes line of spectrometers and light sources.
Technical Details
|
Fibres |
1x illumination fibre, 1 detection fibre, both 200µm, UV/VIS, 1.5m length |
|
Wavelength range |
200-800nm (UV/VIS) or 350-2000nm (VIS/NIR) |
|
Connectors |
2x SMA905 |
|
Probe end |
Stainless Steel cylinder, 130mm long x 3.2mm (1/8”) diameter. The probe end has a 5mm physical gap, 10mm pathlength. |
|
Tubing |
The optical fibres are protected by a silicon inner tube and a flexible chrome plated brass outer tubing. This tubing also provides stress relief. OD 5mm. |
|
Temperature |
-30°C - 100°C. (High temperature available on request) |
|
Bending |
Minimum bend radius: Short term (few seconds) 20mm, long term: 60mm |
Technical Drawing
Ordering Information
|
FDP-2xx200-2.5-MINI |
1/8” Mini dip probe, 5mm gap (10mm pathlength), 2m length |
