Reflection Probes with Small Tips
The FCR-7xx200-2-1.5/2.5x100 is a reflection probe with a small tip to get spectral information of diffuse or direct reflecting materials. This probe is used in many medical applications.
Via a standard SMA905 connector, light is coupled into a fibre bundle consisting of 6 fibres and carried to the probe end. The surface will selectively reflect light back into a 7th fibre. This fibre transfers the data to the output SMA905 connector, which can be coupled to a spectrometer or spectral analyser
A special Angled Fibre Holder (AFH-15) is available for the 1.5 mm diameter reflection probe to enable reflection measurements under 15º, 30º, 45º, 60º, 75º and 90º. For further information, visit the accessories section of this website.
Technical Details
|
Fibres |
7 fibres of 200µm core, 6 light fibres, 1 read fibre. N.A. = 0.22. Standard length 2m, splitting point in the middle |
|
Wavelength range |
200-800nm (UV/VIS) or 350-2000nm (VIS/NIR) |
|
Connectors |
2x SMA905 |
|
Probe end |
Stainless Steel cylinder, 100mm long x 1.5 or 2.5mm diameter |
|
Tubing |
The optical fibres are protected by a Kevlar reinforced PTFE tubing with PVC sleeving, OD =3.8mm. |
|
Temperature |
-20°C - 65°C. |
|
Bending |
Minimum bend radius: Short tern (few seconds) 20mm, long term: 60mm |
Technical Drawing
Ordering Information
|
FCR-7xx200-2-1.5x100 |
Reflection Probe, 1.5mm x 100mm tip, 7x200µm fibres, 2m length, SMA terminations |
|
FCR-7xx200-2-2.5x100 |
Reflection Probe, 2.5mm x 100mm tip, 7x200µm fibres, 2m length, SMA terminations |
